Vacuum kouch machin elektrik control cabinet

Vacuum kouch machin elektrik control cabinet

It is generally composed of three parts: vacuum chamber, vacuum unit and electrical control cabinet. The exhaust system is composed of "diffusion pump plus mechanical pump plus roots pump plus low temperature cold trap plus polycold". The company specializes in the research and development and production of vacuum coating equipment. It has an experienced technical team and a high-quality after-sales service team to solve any problems you encounter during the use of the equipment. Below, the composition of each part of the vacuum coating machine and its working principle are introduced in detail.

Vacuum kouch machin winding kalite

The thickness of the coating layer that can be deposited by the roll-to-roll vacuum coating machine is 0.01-0.2 μm, which can be selected within this range, and some can also be coated with multi-layer films to meet various needs. The Japanese patent proposes a roll-to-roll evaporation device for depositing two different coating materials. The vacuum chamber (6) of the device is divided into an upper chamber (7), a left lower chamber (8) and a right lower chamber (9). During evaporation, the coating materials (21, 25) evaporated by the two groups of evaporation sources (19, 23) are respectively deposited on the plastic film (11), and a glow discharge generator ( 15, 16). The glow discharge gas produced by the generator prevents the plastic film from wrinkling. Using this device, wrinkle-free multilayer films can be coated on extremely thin plastic films for the production of magnetic tapes and thin-film solar cells.At present, the most used ones are 1.3M, 0.9M, 1.5M, 1.8M, etc. The chamber is made of stainless steel and requires no rust. , solid, etc., each part of the vacuum chamber has a connection valve, which is used to connect each pumping pump.

www.superbheater.com